FAQ

What is a die cut vinyl decal?
Die cut decals are one of the most popular styles of decals, and you see them every day on the backs of people's cars. They are typically only 1 or 2 colors. The decal is the image only, with no background. These decals are plotted on a vinyl cutter with a small blade that cuts into the vinyl but not the backing paper. After cutting, the extra vinyl is weeded away by hand and the decal is covered with application tape (transfer tape).
What is a full color printed decal?
A full color decal is printed on a special printer with eco-solvent inks made for outdoor use. We laminate our printed decals to extend their life and to add protection from the sun and from chemicals such as gas and oil. Standard cuts are circles, squares, rectangles and ovals, and we can also contour cut them to almost any shape.
What type of files should I provide for my custom decal?
The best file is a vector file, either .eps or Illustrator (.ai). For full color printed decals, we can also accept a raster file such as a PSD, JPG or TIFF. Be sure the raster file is 300 dpi. For die cut decals, we require a vector file. If a raster file is provided for a die cut job, there will be an additional fee to convert it to a vector format suitable for cutting.
If I save my JPG or TIFF as a PDF or EPS, is it a vector file?
No. Saving a JPG, TIFF, PDF or any other bitmap format as an EPS or AI file does not make it a vector file. The file will still need to be converted or recreated in vector format.
Can I change my low resolution picture into a high resolution image?
No. Resolution can be reduced, but never increased. Despite what you see on TV, you can't just press an enhance button to make an image sharper or clearer.
What kind of vinyl do you use?
We typically use Oracal 651 for our die cut decals and Oracal 631 for die cut wall decals. For our digitally printed decals, we use Oracal 3165, 3651, 3951 and 3268.
I have bubbles in my decal. How do I get rid of them?
Don't worry, it happens to us all at some point. Bubbles are generally caused by trapped pockets of air behind the decal. Poke a small hole with an X-Acto knife or push pin to release the air, then press on the bubble to force the air out. Sometimes bubbles shrink on their own as the decal warms up in the sun.
Will your decals stick to my wall?
Most likely, yes. Wall decals will have a hard time sticking to:
- Highly textured paint
- Patched areas that have not been primed
- Walls with moisture behind the drywall
- High humidity areas, such as bathrooms
- Dirty or dusty walls
- Freshly painted walls (allow at least 30 days for the paint to cure)
- High gloss paint
How do I install my decal?
See our decal installation instructions.